[{"description":"Features:\n\nInput voltage:100V-240V @50Hz\n\nMax output charging current:4A/6A\n\nApplicable for lead-acid battery(15.2V),maintenance-free battery(14.7V),gel battery(13.7V)\n\nOutput DC voltage can be manually regulated(15.2V,14.7V,13.7V)\n\nLCD screen display\n\nCompatibility has been greatly improved\n\n\n\n \n\nFan control function\n\nIn the normal charging process, the cooling fan will auto turn on when the detected internal temperature exceeds 50℃ or the charging current is larger than 1.6A;and it will auto be turned off when the detected internal temperature is less than 35℃ or the charging current is less than 1A.\n\nMinimum starting voltage\n\nWhen the terminal is connected to a charger battery (or other DC power supply ), in order to trigger the charger into working ;this minimum voltage of battery is 6.5V DC, so please make sure your battery voltage is larger than 6.5V DC or above.\n\nReverse polarity protection\n\nWhen the charger is not charging state, the output clips polarity connect reversely ,then the charger will enter the protection model ;it does not have any adverse impact on the performance of the charger.\n\nShort circuit protection\n\nIf the clips are connected each other, the charger will enter the protection mode when the short circuit occurs ,And this would not damage the charge at all .\n\nOver-temperature protection\n\nWhen the charger works in an environment of high temperature, after some time of continuous working ,temperature inside the machine will increase to enter the overtemperature protection mode, the output current is reduced ;it does not have any adverse impact on the performance of the charger.\n\nLCD display screen\n\nThis product is built with a multi-function LCD display screen which can display the battery type, charging voltage, charging stage, the battery capacity during the battery is charging.\n\n \n\n\n\nSpecification:\n\nSize: 23.5*14.5*7 cm\n\nPackage weight:600g\n\nColor:as shown\n\n \n\n\n\n\n\nPackage List: \n\n1*Car Battery Charger"}]